IC stratification within the call

Features:

1, installed inside the elevator car operating panel, you can set the card to reach the designated floor.

2, the card can be achieved manually by bright card or credit card to go to the floor automatically light.

3, after the device is powered down, no credit card automatically enters the state.

4, for the old and new installation of all types of elevators, convenient

5, using various types of card cards, without networking devices are used to save wiring costs, issuing software easy to operate

6, the system uses a passive connection between the contact is completely isolated, will not have any impact on the performance of the original elevator.

7, if the remote device automatically senses the card, you do not need credit card, automatic identification.

8, can be more card to become card control system.

9. Optional add: deductions, limit and other functions.

Parameters:

1. Input voltage: DC12 ~ 24V

2, a single relay input current: <= 80mA

3, no need to manually input port voltage Fire

4, the control board output point: <= 4

5, the relay board output point: <= 16, or <= 24, or <= 32 (optionally, can be cascaded)

6, the output point features: relay switch output.

7, temperature: -10 to 60 degrees Celsius, the working environment humidity: RH30% ~ 95% non-condensing

8. Storage temperature: -20 to 70 degrees Celsius

9, card operating time: <100ms

10, IC / ID cards are without networking use

11, credit card records stored in history: up to 10,000 (with memory storage)

12, the maximum number set Elevator: Unlimited (issuing settings, without setting on the controller)

13, MTBF:> 20000H

14, the average repair time: <0.5H